For older model SC-100A, SC-200 and SC-300 instruments with their original firmware, this service includes the installation of the latest version of the firmware and a test of the instrument to ensure the firmware installed correctly using your provided electrode(s). Our technicians will also do a quick visual inspection of the circuit board and perform any cleaning and maintenance necessary for the SO2 and/or pH electrode. We recommend this service to all older versions of our instruments. This service provides updates in the test mode of your instrument and will not affect the functionality and methods for testing. These updates provide crucial data enhancements and basic but necessary maintenance of the electrodes. This service may help prolong the life of your instrument and electrodes.
Current firmware versions are:
SC-100A: 1.1.2 (1.2.d for newer models)
SC-200: 2.1.3 (2.2.E for newer models)
SC-300: 3.1.3 (3.2.E for newer models)
To find out which firmware version your instrument has, you will need to enter into Test Mode on your device. To do this, simply hold the power button down for 2-3 seconds until a number like the ones listed above shows up. [This is also described in Appendix A of your manual.] That number is your firmware version. If you continue to hold the power button the instrument will turn itself off. If you need any help with this procedure please call our tech support line, 760-494-0597 and select technical support.
If any additional service or repairs are deemed necessary our technicians will contact you with further information.
Turnaround time: 24-48 hours
Please send your instrument with its electrodes to:
6084 Corte Del Cedro #105
Carlsbad, CA 92011
Please include name, address, email address, and telephone number in the package. Customer pays for service fee plus all applicable shipping charges. We recommend that you send it properly insured.